Products
DUV10A diagnostic unit – drive
diagnostics using vibration analysis for preventive maintenance
From an economic point of view, preventive
maintenance is becoming increasingly important in many systems.
The DUV10A diagnostic unit from SEW-EURODRIVE is the perfect sensor
for simple and reliable monitoring of anti-friction bearings. The
DUV10A diagnostic unit measures the structure-borne noise and uses
this value to calculate the frequency spectrum. The unit uses this
frequency spectrum to constantly evaluate the condition of the anti-friction
bearings. The structure-born noise sensor and evaluation electronics
are fully integrated in the diagnostic unit.
DUV10A diagnostic unit at a glance:
-
Unit prevents
downtime and increases system availability
-
Maintenance intervals can be planned
according to the application
-
Data is decentrally recorded, processed,
and evaluated
-
Signs of wear on anti-friction bearings
are detected at an early stage
-
The condition of the bearings is simple
to detect and read: The colors green, yellow, and red indicate the
condition of the bearings
-
Monitoring options: Read values directly
from the sensor or visualize them externally via switch outputs
(DUV10A can be linked to bus systems)
-
Parameters set via RS-232 interface
-
System operators can set parameters
as required
-
Up to 5 bearing positions can be monitored
with one sensor
-
Alternative: Diagnosis of 20 single
frequencies (e.g. tooth meshing frequency, imbalance)
-
Level monitor that monitors the entire
vibration spectrum
Contact
