SEW-EURODRIVE Products: MOVI-PLC® Advanced

Products

The MOVI-PLC^®advanced control class enables control technology that is installed close to the drive in the upper power range. It offers the full functionality of MOVI-PLC^® basic, but also enormous power reserves and high-speed interfaces.

It can be used to completely automate complex and comprehensive motion control applications; e.g., with curves calculated online, multi-axis interpolation, and kinematic transformations.

The MOVI-PLC^® advanced DHx41B control cards can be optionally used for MOVITRAC^® B frequency inverters, MOVIDRIVE^® drive inverters, and MOVIAXIS^® multi-axis servo inverters.

MOVI-PLC^® advanced overview
Synchronous control of up to 64 axes
Programming in IEC 61131, in accordance with PLCopen
2 × ETHERNET interfaces (10/100 BaseT)
2 × CAN interfaces, 1 of which electrically isolated
2 × RS-485
USB
PROFIBUS slave DP-V1 (DHF41B)
DeviceNet slave (DHD41B)
8 digital I/O
Status display for PLC and fieldbus
8 MB program memory
4 MB data memory
32 kB retain variables
8 kB system variables (retain)
Free-wheeling task, 5 cyclic tasks (1 ms ... 10000 ms)
PC-readable memory card for firmware and application program


	GSD files SEW_6007.GSD for DP-V1 for MOVI-PLCbasic, type DHP11B version: 4.0 - 02.02.10

	MOVITOOLS®-MotionStudio 5.60 Complete inclusive MOVITOOLS 4.80 (fullversion) version: 5.60 SP1 - build 5.6.0.7

	MOVITOOLS®-MotionStudio 5.60 Compact version: 5.60 SP1 - build 5.6.0.7

	Ethernet/IP Master for DFE13B version: 2.1- 22.12.2008

	version: 1.1 - 07.04.2008

	EDS files for MOVI-PLC® Advanced version: 1.1 - 23.04.2008

	version: 2060r1

	version: 2060r1

	PROFINET IO GSDML file for UFR41B Advanced Gateway and MOVI-PLC DHR 41B version: 2.1 – 20070312